1968 Yellow Chrysler 300 Convertible on 2040-cars

Auto blog

2015 Chrysler 200 caught looking good after leaking out

We can't yet share all the details on the 2015 Chrysler 200 sedan, but we can direct your attention to the image above, which was published by the boys at Jalopnik after Chrysler reportedly let it out by accident. As you can see, the new 200 will be a nicely styled piece of machinery.
According to leaked documentation, the 2015 Chrysler 200 will come with the buyer's choice of a 2.4-liter Tiger Shark four-cylinder engine with 184 horsepower and 173 pound-feet of torque or a 3.6-liter Pentastar V6 boasting 295 horses and 262 lb-ft. Those ponies will be routed through a nine-speed automatic with a rotary gear selector, sending power to the front wheels. Alternatively, a high-tech all-wheel-drive system will be available that can electronically disconnect the rear axle, saving fuel.
Speaking of fuel efficiency, the 2015 200 will be able to achieve up to 35 miles per gallon on the highway, which is an impressive figure for this class. An on-sale date has yet to be announced, but the next 200 will start at $21,700 (plus $995 for destination) when it does finally hit dealerships.

Chrysler recalling 278,222 trucks and SUVs over bad rear axles

Chrysler has issued a recall of 278,222 light trucks and sport utility vehicles here in the United States. The reason: bad rear axles. Specifically, according to the National Highway Traffic Safety Administration, the rear axle pinion nut may lack a necessary adhesive patch, which could cause the nut to loosen. If this happens, the axle can lock up, which could cause all sorts of havoc on the road.
This is an expansion of the rear axle recall announced in October of last year, where 44,300 Ram 1500 and Dodge Dakota models were being called in. At that time, 12 accidents had been reported due to the faulty axle pinion nut.
Affected vehicles include Ram 1500 trucks from the 2009 to 2012 model years, Dodge Dakota models from the 2009 to 2011 model years, and both the Chrysler Aspen and Dodge Durango SUV twins, both from the 2009 model year only.

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.