2001 Chrysler Sebring Limited 2.7l V6 Auto Low Mileage Leather Cpo Warranty on 2040-cars

Auto blog

Chrysler recalling 278,222 trucks and SUVs over bad rear axles

Chrysler has issued a recall of 278,222 light trucks and sport utility vehicles here in the United States. The reason: bad rear axles. Specifically, according to the National Highway Traffic Safety Administration, the rear axle pinion nut may lack a necessary adhesive patch, which could cause the nut to loosen. If this happens, the axle can lock up, which could cause all sorts of havoc on the road.
This is an expansion of the rear axle recall announced in October of last year, where 44,300 Ram 1500 and Dodge Dakota models were being called in. At that time, 12 accidents had been reported due to the faulty axle pinion nut.
Affected vehicles include Ram 1500 trucks from the 2009 to 2012 model years, Dodge Dakota models from the 2009 to 2011 model years, and both the Chrysler Aspen and Dodge Durango SUV twins, both from the 2009 model year only.

Detroit automakers gain market share simultaneously for first time in 20 years

While monthly sales figures might be an easy way of tracking the progression of the auto industry and individual automakers, looking at market share might be more indicative of how each company is actually standing up against its competitors. For the Detroit Three automakers, they have collectively lost almost 30 percent of the market over the last 20 years, but now, for the first time since 1993, Ford, General Motors and Chrysler have each posted market share gains at the same time.
According to Automotive News, Ford's share increased the most by 0.7 percent, GM was up 0.5 percent and Chrysler rose marginally by 0.2 percent, giving the Detroit automakers a total market share of 45.6 percent. As for the Japan's Big Three, the article reports that Toyota is up by 0.7 percent, Nissan is down the same amount and Honda has seen "little change."

Chrysler's Hurricane engine detailed ahead of 2016 launch

We've been hearing distant rumblings about Chrysler's new Hurricane engine for some time now, but details have been hard to come by. Now, Automotive News is adding some specifics to the scuttlebutt, citing Chrysler documents. According to the industry publication, the Hurricane will blow onto the scene in 2016, but it's not an all-new engine. Rather, it will be rooted in the company's existing 2.0-liter four-cylinder Tigershark powerplant (shown above), albeit with "many new technologies to achieve excellent fuel economy."
It's not clear what sort of technologies Chrysler is referring to, but the Hurricane is expected to continue to use an aluminum block, and the finished product is expected to generate even better figures than the existing 2.0-liter's 160 horsepower and 148 pound-feet of torque (as found in the Dodge Dart). Automotive News notes that the updated 2.4-liter Tigershark debuting in the entry-level 2014 Jeep Cherokee has its basis in the 2.0-liter lump, but unlike the smaller engine, it's been fitted with MultiAir2 electrohydraulic variable valve timing to realize 184 hp and 171 lb-ft and greater efficiency.
Perhaps the Hurricane will incorporate the latter in its bag of tricks? Either way, we're hoping for a more generous torque curve than the what's in the current 2.0-liter Tigershark, which is something of a slug in the Dart - even for a base economy compact.