1988 Suburban Two Wheel Drive 1/2 Ton Fuel Injected 350 V8 on 2040-cars

Auto blog

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

Chevy rolls out Silverado HD High Country

It's been a good week for heavy-duty truck buyers. First, Ram revealed the Black Package for its HD trucks, then it rolled out its new Power Wagon, and now Chevy's getting in on the action with its Silverado High Country HD. Okay, so it may not pack quite the attitude of Ram's latest 2500-series offerings, but the High Country HD will come as a welcome addition to the Chevy Trucks range to those looking to pull their horse, boat or other trailer without skimping on creature comforts.
Rolled out a little under a year ago, the High Country trim is Chevy's answer to the likes of the GMC Denali, Ford King Ranch and Ram Longhorn. It has until now only been offered on the light duty, 1500-series Silverado, but now extends to the 2500 and 3500-series HD models, as well.
So what sets a High Country pickup apart from lesser Chevy trucks? You'll be able to pick it out based on its chrome horizontal grille, body-color bumpers, 6-inch tubular side steps, 20-inch chrome wheels (18-inch on the 3500 and 17-inch on the dualie) and, of course, plenty of special badging. But it's inside where the High Country makes its mark, with a cabin decked out in saddle brown perforated leather, seats that are both heated and cooled, eight-inch touchscreen with full MyLink suite, Bose audio and park assist functions front and rear to keep those color-keyed bumpers looking fresh. (Though Chevy hasn't yet showed us the interior of the HD model, it'll presumably look mostly the same as the cab in the 1500 High Country in the gallery below.)