1962 Chevy Impala 4 Dr Hardtop Driver V8 Auto Disk Older Resto Priced To Sell 63 on 2040-cars

Auto blog

Survey says $25k barrier is a problem for EVs

The majority of consumers are more or less priced out of the market.
Electric cars are gaining popularity with the general public, but are they still too expensive? According to a survey 1,084 consumers by Navigant Research, a consulting firm located in Boulder, CO, 71 percent want their next car to cost under $25,000, while 41 percent won't go a cent above $20K. Looks like people are even thriftier than we'd originally thought.

1956 Corvette SR-2 factory racer profiled

The Chevrolet Corvette has earned its place as America's sports car, capable of taking on the best the world can throw at it. Much of that winning reputation was earned with victories on the track. Now, there was a chance to own an early piece of the nameplate's motorsport history in the form of a 1956 Corvette SR-2 racer, but some deep pockets were necessary to get it, with an estimate of $6.885 million. The story behind the SR-2 is fascinating. In 1956, famous General Motors designer Harley Earl's son was racing in a Ferrari. Obviously, that wasn't going to work given his father's position within the automaker, and Harley and Corvette engineer Zora Arkus-Duntov got to work on a faster racecar. Three were made. This one was reportedly the first, and for 1957 it also received a fuel-injected V8 making a claimed 331 horsepower and four-speed manual gearbox, according to "Corvette Mike," the owner and seller. The SR-2 went on display in Scottsdale, AZ appropriately timed to coincide with the big Barrett-Jackson auction there that wrapped up this weekend. The car wasn't part of that event; instead marque specialist Mike Vietro sold the racer as a private treaty sale. Company spokesperson Troy Worrell told Autoblog both the bids and identities of the bidders will remain undisclosed. The video above goes into even deeper detail about this rare, finned Vette or check out the car's full description for even more info.

2016 Chevrolet Colorado Diesel First Drive [w/video]

The first thing you notice inside the diesel Chevy Colorado is that it's quiet. Almost too quiet. A lot has been done to quell noise and vibration with this new powertrain, and it shows – or rather, doesn't. There's some characteristic diesel clatter at idle, but even then it's distant and practically disappears as you start moving down the road. At full throttle, when the engine is at its noisiest, the sound isn't particularly diesel-like, just a pleasant intake breath. The accompanying smoothness is almost eerie. When we ask where all the noise went, Chevy's engineers, marketing guys, and PR reps all explain that this refinement is what Americans want. We're still not sure. This is a truck, after all, and the diesel pickup customer is different from the guy buying a diesel Cruze for his highway commute. Chevy contends that they're also not the same as the buyer of a Silverado HD. Although this 2.8-liter Duramax four-cylinder has been in service elsewhere around the globe, its first US application is in the Colorado and its GMC Canyon twin. The engine puts out 181 horsepower and 369 pound-feet of torque, and it does so unobtrusively as a result of a lot of modifications for our market. To keep normal diesel sensations out of the cabin, the intake and oil pan both get acoustic treatments. A new, thicker material is used for firewall sound deadening. Redesigned balance shafts have tighter tolerances to increase smoothness. The diesel powertrain is smoother than the Colorado's gasoline V6. One of the more interesting and certainly unexpected vibration-reduction changes is a special torque converter from German supplier LuK equipped with a centrifugal pendulum absorber. This pendulum spreads from the center of the torque converter as engine speed increases and is tuned to absorb the four-cylinder's second-order vibrations, not just those in a narrow frequency band. It does an admirable job, especially considering the engine's biggish, 0.7-liter cylinders, which lead to bigger vibrations. The result is a powertrain that's smoother than GM's (not particularly smooth) corporate V6, which is available in the standard Colorado. It's quieter than a Cruze diesel and even out-softens some gas direct-injection engines on the market. Paradoxically, it may be the most refined of all of the Colorados. No vibration comes through the steering wheel, pedals, floorboards, or even the rearview mirror. But you can tell it's a diesel when you hit the throttle.