Find or Sell Used Cars, Trucks, and SUVs in USA

1992 Chevrolet Stepside on 2040-cars

US $9,250.00
Year:1992 Mileage:14486 Color:
Location:

Hewitt, Texas, United States

Hewitt, Texas, United States

 Beautiful 1992 Chevrolet 1/2 Ton Stepside, over $10K spent in the last 3-4 years on this truck.
Motor - completely overhauled approximately 3 years ago, 14,486 miles since rebuild.  Chevy 350 ci bored to 357, 40 Hyperutatic Flat Top Pistons, Comp Cam 242-480 Lift Flat Tapped, Summit Intake, Holley 600 cfm carb, Summit Billet Dist, Summit Ignition Box with rev limiter, Summit Coil, headers with Magna Flow mufflers.
Transmission - 700R4 with a transgo shift kit, rebuilt same time as motor, 2600 RPM B&M Shifter. Shift indicator connector that connects to the shifter handle and shows the gear you are in need to be replaced.  Should be an easy fix.  Large tranny cooler.
Auburn Posi Unit - 3.42 gears.
Electric fan, after market gages, Pioneer CD Player, Infinity speakers on dash, Sony 6X9 in door, Hyphonixs 1000 watt AMP on a 10" sub. 
New Complete AC systems recently installed.
Interior - tan interior with Bow tie Emblems.  Interior approximately 3 years old and in very good condition. Carpet appears to be original, drivers side carpet needs to be cleaned.
Exterior - beautiful tan/maroon paint approximately 3-4 years old.  Paint is in very good condition but does a couple of chips (see pictures) and a few small rock chips on bumper (see pictures).  Small crack in the fiberglass step bumper drivers side rear bed (see pictures).
Foose Wheels, 18's in front, 20's on back. Tires are 255/55/18 Cooper Discovery H/T in front, 285/50/20 on rear.  Tires are not new but have good tread left.  Right rear tire is newer.
This is a beautiful re-conditioned truck that runs great, looks great, drive anywhere.
I have tried to describe the truck as best as possible, but not responsible for omissions.  Truck is for sale locally.
Please text me with any questions at (254) 292-2425. I will answer any questions as honestly as I can. I want you to be happy with the truck.
PLEASE DO NOT BID  THIS TRUCK IF YOU DO NOT HAVE THE FUNDS TO COMPLETE THE TRANSACTION.

Auto Services in Texas

Wynn`s Automotive Service ★★★★★

Auto Repair & Service
Address: 10649 Sentinel St, Converse
Phone: (210) 650-0353

Westside Trim & Glass ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Automobile Seat Covers, Tops & Upholstery
Address: 2117 White Settlement Rd, Lake-Worth
Phone: (817) 659-9305

Wash Me Car Salon ★★★★★

Auto Repair & Service, Car Wash, Automobile Detailing
Address: 7225 Culebra Rd, Leon-Valley
Phone: (210) 681-9274

Vernon & Fletcher Automotive ★★★★★

Auto Repair & Service, Auto Oil & Lube, Truck Service & Repair
Address: Rockwood
Phone: (325) 261-4916

Vehicle Inspections By Mogo ★★★★★

Auto Repair & Service, Automobile Inspection Stations & Services
Address: 10525 Cypress Creek Pkwy, Cypress
Phone: (281) 807-6673

Two Brothers Auto Body ★★★★★

Automobile Body Repairing & Painting, Automobile Body Shop Equipment & Supplies
Address: 2502 Central Ave Suite B, Desoto
Phone: (972) 266-5455

Auto blog

GM investing $167m in Spring Hill for new midsize vehicles

Tue, 06 Aug 2013

General Motors has announced a large investment in its Spring Hill, Tennessee facility. The former home of Saturn production will be getting a $167 million addition to a previously announced $183 million, to cover a pair of new midsize vehicles. The investment is expected to create 1,800 jobs at the factory.
That $350 million is being divvied up for a pair of programs at Spring Hill. The first will take the bulk of the money ($223 million) and create 1,000 of the 1,800 jobs, while the other will take the remaining $127 million and generate the leftover 800 positions. But GM says the investment will cover "midsize vehicle programs." So what could they be?
The leading candidate in our minds is a new crossover for Buick, called the Anthem, that will slot between the Encore and Enclave, but will be slightly smaller than the Equinox and Terrain. As we've explained, the new model will likely be the first product to sport GM's new D2UX platform, which will eventually replace both the Delta and Theta platforms. Spring Hill is already building the Equinox, so there could be some credence to this theory.

Diesel Power finds the ultimate modified oil-burner

Sat, 24 Aug 2013

For nine years, Diesel Power magazine has run the Diesel Power Challenge, this year's grindfest being "a week-long torture test that features seven events, nine trucks, 8,000 horsepower, and nearly 15,000 pound-feet of torque." The road to being crowned "the most powerful truck" starts with a dyno run, and then continues through the completion of a CDL-style obstacle course, an eighth-of-a-mile drag race while towing a 10,000-pound trailer, a quarter-mile drag race without a trailer, a fuel economy test in the mountains and finally a sled-pulling test through a 300-foot-long packed-mud pit.
What kind of trucks get into such a fight? Last year's winner, for instance - who upgraded his truck this year to prove he didn't "luck into the win" - drives a 2008 Ford F-250 Super Duty with a 6.4-liter Power Stroke V8 upgraded with a custom intake, Elite Diesel triple turbos and a two-stage nitrous system. Another competitor has a 2005 Dodge Ram 2500 powered by a 5.9-liter Cummins inline-six, upgraded with Garrett turbos, dual-stage nitrous, a seven-inch exhaust stack and twin fans built into the bed to cool the Sun Coast Omega transmission. The numbers on that truck: 1,255 horsepower, and 2,063 pound-feet of torque at the wheels. Naturally, as the image above might suggest, things don't always end well.
You'll find all five videos covering this years challenge below. A scene in the dyno video sums it all up perfectly: a competitor leaves his nitrous on too long and the crew is treated to some ominous poppings, he leans out the window, throws both hands up and shouts, "Amer'ca!"

UAW to vote on strike at Kentucky Corvette plant

Tue, 08 Apr 2014

The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."