2003 Cadillac Seville Sls Sedan 4-door 4.6l In Very Good Driving Condition on 2040-cars

Auto blog

How Cadillac improved power output in 2016 ELR by 25 percent

Earlier this year, Cadillac announced that the 2016 ELR would come with a big price drop and a powertrain that packs 25 percent more power output. That's a lot more oomph, but it didn't sound like the Caddy engineers made any major changes to the engine or motors. So, what happened? Let's refresh our memories with the numeric details. The 2016 car is 1.5 seconds quicker to 60 miles per hour than the 2014 model (there was no 2015), down to 6.4 seconds. The 2014 put out 295 pound-feet of torque. For 2016, it will be 373 lb-ft. The specific breakdown of the various components in the powertrain has not been disclosed, but from what we can tell, the two electric motors and the 1.4-liter inline-four engine in the new ELR are not that much different than those in the old one. Sam Abuelsamid, senior research analyst at Navigant Research (and former writer here at Autoblog) said that any of the unspecified upgrades would be difficult to tell on a part-by-part basis, but the overall effect will be noticeable. "The changes to the ELR as I understand them are analogous to getting more performance out of a 1965 Mustang with the entry version of the 289 cubic-inch V8. You can replace the carburetor with a larger version that enables more air and fuel to flow into the engine, thus producing more power. The basic engine hasn't changed, but power capability is being unleashed by feeding it more." "Cadillac has changed components in the power electronics to enable more current flow into the motor and thus produce more torque. When you do this in the Mustang, you probably need to replace the rear axle gears and use a beefier clutch to transmit the power to the wheels. Similarly, the ELR probably has some upgraded clutches, bearings, and gears to withstand the increased total output." Cadillac spokesperson David Caldwell told AutoblogGreen in an email that the new ELR does indeed have more than just new lines of code. "One could not 'reflash' a previous ELR to get the performance of a 2016," Caldwell said. "If one only changed software you would not get the performance upgrade fully, as the 2016 creates higher current, more power. So these have been upgraded physically – hardware.

Cadillac SRX production moving to TN, next-gen Equinox going to Mexico

It's a good week for the town of Spring Hill, TN, as General Motors has announced that its factory in the city of 31,000 will receive a $185 million contract to produce engines. On top of that, the next-generation Cadillac SRX crossover will be built at the factory (NA models are presently built in Ramos, Arizpe Mexico), which was once famous for being the home of GM's now-defunct Saturn brand.
The factory is one of GM's six facilities around the globe that will screw together the company's new line of three- and four-cylinder Ecotec engines. Spring Hill currently builds the 2.0-liter, turbocharged Ecotec, as well as the naturally aspirated 2.4 and 2.5-liter variants.
Spring Hill's vehicle assembly lines were idled in 2009, but were reactivated in 2011. The SRX is just one of the products meant to benefit from last year's $350-million investment, and should have a positive impact, creating or retaining around 1,800 positions at the factory.

Junkyard Gem: 1967 Cadillac Fleetwood Sixty Special Sedan

If you lived in North America in 1967 and you wanted to show the neighbors you'd clawed your way to the peak of the success pyramid, only one car would do: Cadillac Fleetwood. Today's Junkyard Gem is 4,685 pounds of General Motors luxury hardware, finally knocked off the road at age 53 by an unfortunate wreck and now residing in a Denver self-service wrecking yard. The Cadillac brand endured some rough years during the 1970s and 1980s, but rode high during the 1960s. The Fleetwood Sixty Special Sedan started at $6,423 in 1967, or just over $50,000 when figured using inflation-adjusted 2020 dollars. A Mercedes-Benz 250SE sedan set you back $6,385 that year, but it weighed barely half as much and packed just 148 horses against the Cad's 340. Really, you had to get a genuine Rolls-Royce to out-swank the Fleetwood-driving Joneses back then (the Lincoln Continental and Imperial didn't have quite the snob appeal at that time), and the Roller cost more than several Fleetwoods combined. This car has been around during its long life. On the windshield, we see 1980 and 1981 parking stickers from the Keeneland Club in Kentucky. This car was already 13 years old by that time, but still very classy. At some point, the car must have migrated to California. Here's a U.C. Berkeley sticker. This ancient In-N-Out sticker comes from the Southern California-only era of the famous hamburger chain. Sometimes it's tough to determine the reasons that an old car ended up in a place like this, but that's not a problem here. Let's hope the car's occupants had their belts on (lap belts only in 1967, but still better than nothing), because these old Detroit land yachts didn't have much in the way of energy-absorbing crumple zones. The paint and interior are quite rough, so this car depreciated from being worth perhaps a couple of grand to scrap value in an instant.  Cruise control was a very rare option in 1967, and this car has it. The famous Fleetwood triple-tone horns were still there when I got to this car. Under the hood, 429 cubic inches (7.0 liters) of super-smooth Cadillac pushrod V8. This engine grew to 472 and then 500 cubic inches during the following few years. The paint shows some great patina. Did I buy the horns? Of course I bought the horns — I always bring my trusty lightweight junkyard toolbox when I head out to shoot some Junkyard Gems. Related Video: