Black Sapphire Metallic Auto Awd Technology & Convenience & Cold Weather Pkg on 2040-cars

Auto blog

Alpina bringing new B4 Bi-Turbo Cabrio to Geneva

Interested in picking up a new BMW 4 Series with a turbo six? You've got options: you can get the 435i with 300 horsepower or spring for the M4 with 425 hp. But if it's the convertible model you want, we're afraid you'll be limited to the latter as the M division can't help you (at least not for the time being). But that's where Alpina comes in.
The aftermarket tuner closely associated with BMW offers the B4 Bi-Turbo (at least in Europe) with that same 3.0-liter twin-turbo inline-six massaged up to 410 horsepower that starts to pose a threat to the M4. What's more is that the Alpina's 442 pound-feet of torque eclipses the M4's 406 lb-ft, to say nothing of the 435i's 300.
Best of all, Alpina just confirmed via Facebook that it'll offer the B4 in convertible form, bringing the resulting BMW Alpina B4 Bi-Turbo Cabrio to the Geneva Motor Show. We'd expect the weight penalty to knock it slightly off the coupe's quoted 4.1-second 0-60 time, but not by much. If only BMW were to bring this one Stateside like it does with the B7 sedan.

2014 BMW 4 Series Coupe officially debuts, priced from $41,425*

Well, that didn't take long. Less than two hours after the first images of the 2014 BMW 4 Series Coupe leaked onto the Internet, we've been given the go-ahead to publish the whole kit and caboodle. And while we won't say we told you so, it looks as though the car's official details are standing true to our earlier predictions.
In other words, BMW will offer the 4 Series in 428i and 435i models, both of which can be had with xDrive all-wheel drive. Just like in the 3 Series, the 428i is powered by a 2.0-liter turbocharged inline four-cylinder engine, good for 240 horsepower and 255 pound-feet of torque, and the 435i gets BMW's turbocharged 3.0-liter inline-six making 300 hp and 300 lb-ft. In three of the four models, both a six-speed manual and eight-speed automatic transmission are available; the 428i xDrive can only be had with the auto 'box. The 428i (with rear-wheel drive, we assume) can hit 60 miles per hour in 5.7 seconds (though BMW doesn't specify with which transmission), and the 435i will do that same sprint in 5.3 seconds with the manual and five seconds flat with the eight-speed auto.
We've already dissected the 4 Series' visuals, but the numbers show just how different it is from the 3 Series sedan. The 4 Coupe is one-tenth of an inch longer overall, while riding on the same 110.6-inch wheelbase, is 0.6 inches wider, and has a roofline that's a full 2.7 inches closer to the ground. It looks sleek, incorporating BMW's new design language from the 3 Series with an overall profile that's similar to the larger 6 Series coupe.

Meet the inventor of the BMW 3 Series wagon

It's hard to imagine, but once upon a time, there were only two BMW 3 Series variants: the coupe and sedan. Back before gran coupes, convertibles and yes, even touring models were available, buyers could only get their 3 Series fix if it came with two or four doors and a fixed roof. Back in the mid '80s, BMW engineer Max Reisbock was having some trouble fitting his whole family into his four door. Rather than suck it up and buy a van, he picked up a wrecked 3 Series and got to cutting in a buddy's garage. Months later, he had the very first 3 Series Touring ever built.
At first, he kept the the car to himself, using it to haul friends and family around, but he eventually showed it off to his friends at work. When the BMW executives found out about his project, they called him up to take a closer look. After putting an eyeball on the car, they took it, copied his design, made a few tweaks and quickly rolled out the first production 3 Series Touring. How's that for validation? Check out the video below for Reisbock's story.