Awd 3.0si Suv 3.0l Nav Hid Cd Panoramic Sun Roof Heated Leather Climate Control on 2040-cars

Auto blog

Behind the scenes of BMW's 'Drift Mob,' Part 1

Generally speaking, marketing and journalism don't mix, but every now and then, what goes into the marketing of a car - the 2015 BMW M235i, in this case - is worth documenting. In that spirit, we took BMW up on its offer to bring us behind the scenes of its upcoming "drift mob" video, starring five red M235i coupes frolicking around a traffic circle in a major world city (BMW has asked us to be coy about which one so as not to blow its cover before the shoot).
The five drivers can all be considered legends of modern-day drifting and stunt driving: Rhys Millen, Samuel Hübinette, Dai Yoshihara, Rich Rutherford and Conrad Grunewald.
As the only US media outlet in attendance, Autoblog plans to follow up with a full story on the experience once BMW polishes and releases the video in a month or so. In the meantime, check out our photos of this epic practice session we captured on our first day hanging with the crew, and be sure to watch this space for more behind-the-scenes action.

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.

BMW readying Spartanburg expansion for X7 production

Prior to the debut of the original X5 in 1999, the idea of a BMW crossover might have seemed like heresy. But here we are, fifteen years removed from the Frank Stephenson-penned design, and the Bavarian automaker has expanded its crossover lineup to include the X1, X3, X4 and X6, and it's showing no sign of slowing down.
We recently reported that BMW is planning on slotting an X2 in at the bottom of the range between the X1 and X3, but now it's being widely reported that it's got an even larger one to put in at the top of its utility line. That, of course, would be the X7, a long-rumored three-row model that would give BMW a large family hauler to challenge the Mercedes-Benz GL.
According to The Wall Street Journal, BMW is expanding its assembly plant in Spartanburg, South Carolina, to accommodate production of the X7 alongside the X3, X4 and X5 that it already builds there for local consumption.