Xdrive28i Low Miles 4 Dr Automatic Gasoline 2.0l 4 Cyl Jet Black on 2040-cars

Auto blog

BMW i8 with 500+ horsepower in the cards?

While BMW makes plenty of machinery to keep enthusiasts interested, its most enticing models are often based on more ordinary ones. That's what made the arrival of the i8 so captivating, emerging as the first stand-alone BMW sports coupe since the M1. But if its dual purpose - trying its best to both embrace the earth and traverse it rapidly - somehow left you disappointed, the next development could prove to fix that.
According to Automobile, BMW is working on a more potent i8S model. The hardcore version of the hybrid sports car would offer more power and a stiffened chassis to make it that much more aggressive. The Bavarian automaker is reportedly still evaluating two potential powertrain options: The first would pair a 2.0-liter twin-turbo four-cylinder good for 320 horsepower to an electric motor with another 204 hp. The second would use a 3.0-liter straight six with 480 hp and an electric motor with 109 hp. Both would be mated to a nine-speed dual-clutch transmission and an integrated starter motor packing an extra 27 hp.
Either way, we'd be looking at a combined output well in excess of 500 horsepower - far more than the existing i8's 228-hp turbo three and 129-hp electric motor - dropping the 0-62 time down from 4.1 seconds to an estimated 3.5. Couple that to a more advanced carbon chassis, wider tires and other goodies, and the i8 would be transformed into a far more capable performance machine than it already is.

2015 BMW M4 Convertible is here to put wind in your sails

Each generation of the BMW M3 has included a convertible model. Even the distant E30, the patriarch of the M3 line, had an ultra-rare (only 787 were built) droptop model. The convertible became more common on the successive generations, with the hardtop-convertible E93 being the most recent. Considering this history, there seemed very little doubt that as the M3 became the M4, a convertible would be in the cards. Now, the new droptop has arrived.
Set for its global debut at the 2014 New York Auto Show, the 2015 BMW M4 Convertible features, like its forbearers, everything that's great about the hardtop variant while adding an unlimited amount of head room. That means the same 3.0-liter, 425-horsepower, 406-pound-foot, twin-turbocharged straight six sits under its domed hood, while either a six-speed stick or a seven-speed M dual-clutch transmission dispatches power to the fat rear tires.
As for specific differences between the hardtop and the new convertible, obviously, the droptop is heavier. A lot heavier. Where an M4 with a six-speed manual tips the scales at 3,530 pounds, the M4 Convertible weighs in at 4,055 pounds. Believe it or not, BMW has actually trimmed 90 pounds from the last-generation M3 convertible, code-named E93. This marginal weight reduction from the third-generation convertible to the fourth is barely half of the 174 pounds BMW was able to subtract when transitioning from M3 Coupe to M4 Coupe.

BMW to offer carbon fiber wheels in a year or two

The Citroën SM sat on the first set of production glass fiber and resin wheels in 1972 when parent company Michelin developed the exotic hoops in order to take the SM rallying. It wasn't until 2008 that we got the first all-carbon-fiber wheel for passenger cars in the form of a prototype model from Weds Sports in Japan that remained a prototype. Australian company Carbon Revolution followed that a year later with its CR-9 all-CF wheel, first introduced on the Shelby Ultimate Aero and now available for independent purchase for about $15,000 per set. BMW could be the first OEM to offer entire wheels in carbon fiber reinforced plastic in two years.
The wheels - either all-CFRP or using a CFRP rim and alloy spokes - were shown off during BMW's Innovation Days in Munich and are products of the development work done on its i-branded cars. The full-CFRP wheel is 35-percent lighter than a forged alloy wheel, the hybrid alloy and CFRP wheel is 25-percent lighter, making for a decent drop in unsprung rotating weight. As demonstrators during a tech day the wheels aren't yet in the pipeline for production and EU approval, but an article in Auto Express claims that they could be on the market as soon as two years from now.
Other possible parts include a full carbon fiber steering wheel and propeller shaft, the latter of which is coming as a single-piece component on the new M3 and M4. BMW is also talking up its use of secondary carbon fiber - waste material from i3 and i8 production - that can be used for items like IP support structures, seat frames and spare wheels in place of traditional metals like aluminum and magnesium. There's an excerpt of the Innovation Day press release below with more details.