Bmw 530i 5-speed Manual Transmission Heated Leather Sunroof Clean No Reserve on 2040-cars

Auto blog

Audi S3 pitted against BMW M135i in track battle

Audi and BMW have long been enemies on both the road and the track, with their respective M and S/RS lines duking it out to the delight of auto enthusiasts everywhere. In this video from Evo, two of the rivalry's newest combatants take to the track - the Audi S3 and the BMW M135i.
The new Audi S3, which is finally coming to America, throws down with a 2.0-liter, turbocharged four-cylinder. 290 horsepower and 280 pound-feet of torque are deployed to a Quattro all-wheel-drive system via a six-speed, S-Tronic dual-clutch transmission, allowing the five-door Audi to scamper to 60 in under five seconds.
The BMW, which Americans will know as a long-roof version of the new M235i Coupe, comes to the track with 320 ponies and 331 lb-ft of torque. That's a good bit more than the Audi, but the M135i has only two wheels to send its power to, an eight-speed single-clutch automatic (a six-speed manual is available) and a slightly higher curb weight.

Giles Taylor succeeds Ian Cameron as head of Rolls-Royce design

Back in the day, a Rolls-Royce looked pretty much the same as a Bentley, but with a different grille. Once BMW took over Rolls-Royce, however, it was faced with the challenge of visually separating itself from its former sister brand. And most would agree that it did so pretty well. But its cars have looked pretty much the same ever since. What Rolls-Royce needs, then, is a bit of a design shake-up. And that's just what this latest appointment could bring.
After a baker's dozen years as design director at Rolls-Royce (and twenty years designing for the BMW Group altogether), Ian Cameron is retiring from his post. In his place, Rolls-Royce has named Giles Taylor as its new director of design. In his new capacity, Taylor will report directly to BMW Group chief designer Adrian van Hooydonk, and be responsible for all design matters related to the Rolls-Royce brand and its products.
Taylor was promoted to the role from his previous position as head of exterior design for the marque, a position he's held for barely more than a year. We'll be eagerly watching to see what the veteran British car designer has in store for the future of Rolls-Royce. In the meantime you can read the full announcement below.

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.