1995 Bmw 530i Base Sedan 4-door 3.0l (5spd Manual) on 2040-cars

Auto blog

BMW recalling all 2000-06 3 Series models over airbags in US, 1.6M globally

We just can't seem to get away from recalls involving the faulty airbag inflators supplied by Takata. There are already millions of vehicles in need of repair as a result of these ever-expanding campaigns, and BMW is adding another 1.6 million worldwide. The Bavarian automaker is issuing a recall for certain 3 Series models, including 574,000 of them in the US, to replace the passenger-side, front airbag inflator.
Specifically, the campaign covers 3 Series models from the 2000 through 2006 model years built between May 1999 and August 2006. "It's only the E46" generation of cars that are affected, which are now two model revisions old, according to BMW of North America spokesperson Matt Russell, speaking to Autoblog.
These models suffer the same problem as the rest of the vehicles with the faulty inflators. It's possible for the part to rupture during airbag deployment and possibly spray shrapnel at the occupant. However, according to BMW, the automaker isn't aware of any actual cases of this happening in any of its vehicles.

BMW unveils 2016 X5 M and X6 M super CUVs

The second-generation BMW X5 M and X6 M have officially made their arrival for the speed-obsessed, crossover-loving masses that aren't willing to turn to Mercedes-AMG or Land Rover Special Operations.
While the new models retain their 4.4-liter, twin-turbocharged V8s, power has increased from 555 horsepower to 567 ponies. Torque is up more significantly, climbing from 500 pound-feet to 553 pound-feet. The extra twist is slightly less accessible, with peak grunt arriving between 2,200 and 5,000 rpm, rather than the earlier model's 1,500 to 5,650. Still, we'll take the ten percent increase in torque as a net win.
The big powertrain switch sees the old X5/6 M's six-speed automatic replaced with an eight-speed Steptronic transmission from BMW M. This new gearbox feeds power to an xDrive all-wheel-drive system that can variably shuffle up to 100 percent of power to either axle. In conjunction with the force-induced thumper under the hood, this powertrain arrangement allows both M models to hit 60 miles per hour in just four seconds. That's a mightily impressive stat in a 5,000-plus-pound vehicle.

BMW considering North American engine plant?

BMW may be set to expand its US operations with a new engine plant, Bloomberg reports. The Bavarian automaker already has its Spartanburg, SC factory which builds the company's X3, X5 and X6 crossovers. According to the story, Mexico is also under consideration for the BMW engine factory, with the report claiming a final decision will be made in 2014.
"Establishing local motor manufacturing abroad is more complex than assembling cars, but it's a logical step for them to eventually start making engines in markets where they're expanding vehicle production," Juergen Pieper, an analyst for Bankhaus Metzler tells Bloomberg. Building engines in the US or Mexico would save BMW from having to ship engines for some of its most popular models across the Atlantic.
BMW, for its part, hasn't said anything concrete. Spokesman Mathias Schmidt is quoted in the story saying, "As part of our long-term growth strategy, we're frequently looking at different countries for possible locations of future production facilities. No decisions have been made yet, though, for an additional plant."