2006 Bmw 330i With Sport And Premium Package, Black on 2040-cars

Auto blog

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.

2014 BMW 4 Series drops its top, priced from $48,750*

BMW will debut its new 2014 4 Series Convertible at the Los Angeles Auto Show in November, and after seeing plenty of spy shots and, most recently, some leaked images, we now have all the official details. To no one's surprise, the 4 Series convertible is, essentially, a topless version of BMW's new-for-2014 4 Series coupe, and will be offered in the United States in the same 428i and 435i guises.
On the base end, that means the 428i Convertible arrives with the company's 2.0-liter turbocharged inline four-cylinder engine, good for 240 horsepower and 255 pound-feet of torque, and available with either rear- or all-wheel drive. BMW says the 428i will sprint to 60 miles per hour in a respectable 6.2 seconds. For folks in need of more thrust, BMW will happily sell you a 435i Convertible, available only with rear-wheel drive, powered by a 3.0-liter, twin-turbocharged inline-six that produces 300 hp and 300 lb-ft of twist. Hitting 60 mph in the 435i will take roughly five and a half seconds with the standard eight-speed auto. Curiously, BMW did not mention anything about a six-speed manual transmission for either model, so looks like this droptop might be an auto-only affair. We've contacted BMW for confirmation, so we'll keep you posted.
Like the 3 Series Convertible it replaces, the 4 Series uses a three-piece folding hardtop configuration, and BMW says that added sound deadening reduces audible wind noise by about two decibels. Folding the automatic roof takes just 20 seconds, and can be done at speeds up to roughly 11 mph. For chilly, top-down driving (something we're big fans of), there are now three-temperature neck warmers for the front seats - just like what Mercedes-Benz offers with its AirScarf system.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.